Wheel Alignment
& Tire Tools
Repair Stands Toolkits Cassette/Freewheel
Tools
Bearing Service
Tools for Hub/ B.B.
Brake Tools Chain Tools Cleaning &
Lubrication
Crank & Pedal
Tools
Frame Tools


Repair Stands

Park Home Mechanic Repair Stand PCS-9
The new PCS-9 offers Park Tool quality in an entry level repair stand for the home mechanic. Check all these features:.


  • Three-point leg system creates stable base
  • Height adjusts from 39"to 57"(99cm to 145cm)
  • Screw type clamp adjusts to fit tubes of various shapes from 7/8" to 3" (24mm to 76mm)
  • Screw type clamp adjusts to fit tubes from 7/8" to 3" (24mm to 76mm)
  • Clamp rotates 360 degrees for easy access to any part of bike. Will also clamp on aero shaped seat posts.
  • Legs fold upward for easy storage. Loosen the lower bolt on the primary tube, and lift legs upward

Park Home Mechanic Repair Stand PCS-10
More and more cycling enthusiasts are demanding a high-quality repair stand so they can do their own bicycle repairs. Park has taken the best features of their shop stands and built them into this home mechanic stand:


  • The new PCS-10 has all the features of our popular PCS-9 Home Mechanic Repair Stand but with special upgrades to make set up, take down, and use faster and easier.
  • The PCS-10 works well with many recumbents and bikes with odd shaped tubing. Cam-type clamp allows single action clamping of tubes 7/8” to 3” (24mm to 76mm).
  • Clamping pressure is fully adjustable and jaw covers are replaceable (part #1185K).
  • Composite top tube for smooth 360-degree clamp rotation.
  • Quick release height adjustment (39” to 57”, 99cm to 145cm)
  • Folds to 41” (104cm) for portability and storage.
  • Three-point leg system with reinforced center yolk for superior stability
  • Sliding retention rings lock folding legs

Park Home Deluxe Home Repair Stand PCS-4
The PCS-4 has all the features of the PCS-1, but adds our Adjustable Linkage Clamp (the same clamp used in our heavy duty shop stands) and a new leg stabilizing system that creates a rock-solid base to resist tipping. Perfect for heavier duty home use or light duty shop use. Key features include:


  • Clamping pressure and is fully adjustable.
  • Quick release lever mechanism for adjusting height
  • Elvax® covered cast aluminum jaws can be adjusted to fit any frame tube up to 1-5/8 inches.
  • Bicycle can be rotated a full 360 degrees and securely locked at any angle using the exclusive Park Tool tapered rotational locking system.
  • The height of the clamp is adjustable so the user can work at the height that is most comfortable and efficient.
  • The entire repair stand weighs less than 17 lbs. and quickly and easily folds down to 40 x 7 x 7 inches for easy carrying and storage.

Park PRS-20 Team Race Stand
The new PRS-20 Team Race Stand is a compact, Euro-style work stand that securely holds the bike without clamping the frame tubes or seat post.:


  • Ideal for bikes with ultra lightweight frame tubes and seatposts, and for bikes with tight access areas that can't be clamped.
  • Originally designed for the mechanics of the Tour de France-winning Astana Professional Cycling Team, the PRS-20 is now available to professional and home mechanics everywhere.

    The PRS-20 now features a taller bottom bracket saddle to clear the sensor used power meter (watt measuring) cranksets.

Park Mechanic Bench Mount Repair Stand PCS-12

  • A bench mount version of our popular PCS-10 Home Mechanic Repair Stand.
  • Features a quick adjusting cam-type clamp that fits tubes up to 76mm and rotates 360 degrees for easy access to any part of the bike.
  • Clamping pressure is fully adjustable to prevent damage to thin walled tubes.
  • Durable powdercoat finish. Mounts to any flat surface (mounting bolts not included).

Park Deluxe Wall Mount Repair Stand PRS-4W

  • Designed to be easily mounted to any post or wall stud, the PRS-4W is a shop quality stand using the same 100-3C clamp and locking system as the PRS-2, PRS-3, and PRS-4.
  • The PRS-4W places the clamp approximately 14.5 inches (37cm) from the wall.
  • Powder coat finish.
  • The wall mounting plate is 6 inches by 2.5 inches (approx. 15cm x 6cm).
  • Mounting holes approximately one-half inch in diameter and are on 4-inch centers (100.2mm). Mounting bolts not included.

Park Portable Workbench PB-1

  • Perfect for taking to races and rides, the PB-1 is a workbench that folds for easy transport and storage.
  • Features a large work surface (91.5cm x 58.5cm) with specially sized slots, holes, and recesses and for holding tools, shop towels, lubes, beverages, etc.
  • Folding steel legs provide a solid base for a toolbox and supplies.
  • Dimensions: Folded- 108cm x 58.5cm x 18cm
  • Set up- 91.5cm x 58.5cm x 82.5cm

Park Work Tray Plastic for Repair Stand #104

  • This large tray is ideal for holding small parts and tools
    It features deep sides so small items stay put. A variety of slots and holes hold any tool.
  • Fits all Park Tool Repair Stands except PRS-2 OS, PRS-3 OS, and PRS-4 OS, and PRS-15. The current PRS-5 (2002) uses a black vertical tube that mates well with the 104 tray
  • Pre-2002 PRS-5 models use a blue oval tubing. This blue tubing has marginal but adequate contact with the 104 tray

Park Internal Seat Tube Clamp ISC-4

  • Clamping directly to freshly painted or ultra thin-walled frame tubing can cause inadvertent damage.
  • The new ISC-4 securely holds most bikes without clamping on any frame tube.
  • To use, simply insert the ISC-4 into the frame’s seat tube, tighten the knob, and clamp into any Park Tool Repair Stand.
  • The ISC-4’s hex-shaped shaft resists twisting while clamped in the stand. Works with a huge range of seat tube sizes—anything with an inside diameter of 24mm to 32mm.

Park Handlebar Holder HBH-1

  • The Handlebar Holder is designed to hold the handlebars stationary, keeping the front wheel from "flopping" side to side while the bike is worked on.
  • This flopping can cause the handlebars or brake levers to strike the top tube, causing damage to the frame
  • The HBH-1 will hold the handlebar securely when the bicycle is rotated to any position in your Park Tool Repair Stand
  • Works on virtually all mountain and road bikes. Velcro® strap is included to attach the Handlebar Holder to the frame
  • Very useful for hydraulic brake work when raising the front end for line bleeding.




Links | Bike Buying Guide | Ontario Bike Trails | Site Map